unit Archives - FLUX:: Immersive https://www.flux.audio/knowledge-base/tag/unit/ FLUX:: Immersive Mon, 07 Dec 2020 09:19:30 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://www.flux.audio/wp-content/uploads/2017/08/132.png unit Archives - FLUX:: Immersive https://www.flux.audio/knowledge-base/tag/unit/ 32 32 164167279 VST – Automation parameters not accessible https://www.flux.audio/knowledge-base/vst-automation-parameters-not-accessible/ Mon, 07 Dec 2020 09:19:30 +0000 https://www.flux.audio/?post_type=epkb_post_type_1&p=15879 If you’ve installed a new updated version on top of a previous version, you may need to perform a plug-in re-scan in your DAW to update the plug-in parameter list. Some DAWs (e.g. Motu Digital Performer) require a full snapshot of the plug-in in order to list the parameters correctly. Consult the DAW user manual […]

The post VST – Automation parameters not accessible appeared first on FLUX:: Immersive.

]]> If you’ve installed a new updated version on top of a previous version, you may need to perform a plug-in re-scan in your DAW to update the plug-in parameter list.

Some DAWs (e.g. Motu Digital Performer) require a full snapshot of the plug-in in order to list the parameters correctly.

Consult the DAW user manual to find out the procedure for a plug-in re-scan, this procedure may be necessary to perform in DAWs using the AU as well as the VST versions of our software.

The post VST – Automation parameters not accessible appeared first on FLUX:: Immersive.

]]> 15879 IRCAM Tools HEar in 5.1 in Digital Performer https://www.flux.audio/knowledge-base/ircam-tools-hear-in-5-1-in-digital-performer/ Mon, 07 Dec 2020 09:03:32 +0000 https://www.flux.audio/?post_type=epkb_post_type_1&p=15868 How to setup IRCAM Tools HEar in 5.1 in Digital Performer. Create six mono audio tracks and one aux track. Set the outputs of each mono audio track to Bus 1-6, respectively. Set the input of the aux track to Bus 1-6. Set the output of the aux track to a 5.1 surround bundle where […]

The post IRCAM Tools HEar in 5.1 in Digital Performer appeared first on FLUX:: Immersive.

]]> How to setup IRCAM Tools HEar in 5.1 in Digital Performer.

  1. Create six mono audio tracks and one aux track.
  2. Set the outputs of each mono audio track to Bus 1-6, respectively.
  3. Set the input of the aux track to Bus 1-6.
  4. Set the output of the aux track to a 5.1 surround bundle where the first two outputs are the ones you are monitoring from (i.e. headphones)
  5. Insert the AU plugin on the aux track.

This setup will feed the outputs of each audio track into the plugin on the aux. The plugin will then output a stereo track, which is sent to the first two outputs of the surround output bundle.

To create a surround bundle (which you will need to do for bus 1-6 and your 5.1 output bundle) go to the Bundles window. Select the Outputs tab. Click the “add” button. This will create a new bundle. Select the dropdown menu in the ‘Model’ column to set the bundle to 5.1.

The post IRCAM Tools HEar in 5.1 in Digital Performer appeared first on FLUX:: Immersive.

]]> 15868