expander Archives - FLUX:: Immersive https://www.flux.audio/knowledge-base/tag/expander/ FLUX:: Immersive Mon, 07 Dec 2020 09:16:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://www.flux.audio/wp-content/uploads/2017/08/132.png expander Archives - FLUX:: Immersive https://www.flux.audio/knowledge-base/tag/expander/ 32 32 164167279 Does FLUX:: dynamics processors provide MS Mid/Side processing? https://www.flux.audio/knowledge-base/does-flux-dynamics-processors-provide-ms-mid-side-processing/ Mon, 07 Dec 2020 09:16:13 +0000 https://www.flux.audio/?post_type=epkb_post_type_1&p=15875 The major part of Flux:: dynamics processing plugins supports a specific detection algorithm allowing for both standard stereo and MS processing. In addition to this, the Flux:: Epure v3 equalizer offers up to four MS encoders/decoders and associated I/O routings for setting up the encoding/decoding. Epure MS Routing Setup Specific information for a certain product […]

The post Does FLUX:: dynamics processors provide MS Mid/Side processing? appeared first on FLUX:: Immersive.

]]> The major part of Flux:: dynamics processing plugins supports a specific detection algorithm allowing for both standard stereo and MS processing.

In addition to this, the Flux:: Epure v3 equalizer offers up to four MS encoders/decoders and associated I/O routings for setting up the encoding/decoding.

Epure MS Routing Setup

Specific information for a certain product is found under features on the product page for the actual concerned product.

Flux:: Product Pages

The post Does FLUX:: dynamics processors provide MS Mid/Side processing? appeared first on FLUX:: Immersive.

]]> 15875 Pure Series – Dynamic Factor and Dynamic Velocity https://www.flux.audio/knowledge-base/pure-series-dynamic-factor-and-dynamic-velocity/ Mon, 07 Dec 2020 09:11:04 +0000 https://www.flux.audio/?post_type=epkb_post_type_1&p=15870 Applies to: Alchemist, Solera and the Pure Series Dynamics Processors The Dynamic Factor and Dynamic Velocity parameters will impact the detection of signal dynamics. These settings comes in handy when the signal to be processed has: Too much dynamics – You can choose a value of the Dynamic Factor that is smaller than 1, to […]

The post Pure Series – Dynamic Factor and Dynamic Velocity appeared first on FLUX:: Immersive.

]]> Applies to: Alchemist, Solera and the Pure Series Dynamics Processors


The Dynamic Factor and Dynamic Velocity parameters will impact the detection of signal dynamics. These settings comes in handy when the signal to be processed has:

  • Too much dynamics – You can choose a value of the Dynamic Factor that is smaller than 1, to limit the ‘pumping’ effect of the compressor, as an example.
  • Too little dynamics – The threshold can become difficult to adjust, for an expander / gate, as an example, conversely, a value greater than 1 will be chosen.

The Dynamic Velocity will play on the speed of the detection and refine the setting.

These parameters work for all modes. and will be common to the 4 modules comp / dcomp / exp / dexp, and are intended when trying to solve certain special cases of dynamics.

The post Pure Series – Dynamic Factor and Dynamic Velocity appeared first on FLUX:: Immersive.

]]> 15870